Home > > Heat exchanger tubes Manufacturer, Supplier| T5 Heat exchanger Tube| CS Heat exchanger Tube| seamless Heat exchanger Tube

Categories


Emergency delivery: Contact MD Exports LLPs


Associate Manufacturers

Surplus stock of Steel Pipes & Tubes:

Specialist in:

Offering best price on:

Widest inventory of:


SS,CS,Alloy Steel Pipe Prices

Heat exchanger tube suppliers

6% offer on high quality Heat Exchanger Tubes, Power Generation Heat Exchanger Tubes - Tubacex Make, Jindal Make Heat Exchanger Tubes suppliers in India, CS Seamless Tube for Boiler (MSL Make)

Heat Exchanger Tube supplier in Malaysia/ Singapore/ The Philippines/ India/ South Africa

 

IBR/ NON IBR Heat Exchanger TubeAesterion Steel Pipes is a leading Heat exchanger tubes Manufacturer in India. We export & supply a wide range of Jindal Heat Exchanger Tubes, ibr Heat Exchanger Tubes, non ibr boiler, Heat Exchanger Tubes for higher temperatures, welded boiler tubing, boiler steel tubing, fabricated and straight Heat Exchanger Tube.

Heat exchanger tubes can be supplied to most outside diameters, thickness, material specifications and radii. Tubes are manipulated to the tolerance of TEMA R as a minimum.

Bend areas plus necessary straight leg sections can be heat treated in accordance with specified requirements.

Heat exchanger tubes can also be hydrostatically tested if required. We can offer a range of additional testing on request, including dye penetrant and PMI testing.

Heat exchanger tubes can be packed into solid wooden export cases (ISPM-15), or supplied in finger pallets to suit clients requirements. For both options all tubes are separated to facilitate easy assembly of bundles at site.

Stainless Steel Seamless , Tubes & ‘U’ Tubes are manufactured and tested to international Standards, under strict supervision of highly qualified and experienced technocrats, to satisfy and meet the most critical demands of reputed industrial users for various applications, sizes, grades and specifications as per ASTM and also conforming other international Grade/Standards Equivalent to ASME, DIN, EN, NFA, and JIS etc. MD Exports LLP Pipes has specialization in tubing for Heat exchangers, LP/HP Heaters, Condensers, Heating Elements and duly annealed, pickled, tubes with 30-meters length tubes.

Strength of Precision Heat exchanger tubes

  • Weld quality
  • In house raw material with typical high fatigue strength properties
  • High strength tubes with high ductility
  • ERW / CEW Tubes with low tolerances on OD and thickness

Applications of Heat exchanger tubes

  • Steam Generating Boiler
  • Heat Exchanger
  • Air Preheater Unit
Heat exchanger tube Grade: TP-304/304L, TP-304H, TP-316/316L,TP-316H, TP-316Ti, TP-317/317L,TP-321/321H,TP-347/347H,TP-405,TP-410, S31260, S31500, S31803, S32205, S32550, S32750, S32760.
Size: 6.00 mm OD to 50.8 mm OD
Thickness: 0.89 mm THK to 5.00 mm THK
Specifications: ASTM A-213, A-268, A-269, A-789, Equivalent to ASME, EN, JIS Etc.
Applications: Oil & Gas, Petrochemical & Refinery, Fertilizer, Power Plant & All major industries.

IBR/ NON IBR Heat Exchanger Tube

IBR/ NON IBR Heat Exchanger Tube

IBR/ NON IBR Heat Exchanger Tube

Heat Exchanger Tube Engineered for Extreme Environments

Request for free quote

MD Exports LLP Pipes has an extensive range of boiler and stay tubes available to meet your Heat Exchanger Tube requirements no matter how demanding.

  • Welded Heat Exchanger Tubes can be supplied from stock to suit your needs
  • Hot finished Heat Exchanger Tubes can be supplied from new production
  • We can arrange cutting, deburring and testing
  • Heat Exchanger Tubes can be swaged/bulged to suit your requirements
  • Shipping can be arranged worldwide
  • Stock lengths ranging from 10200-12250mm

Heat Exchanger Tube is made from heat resisting carbon and low alloyed steels which can withstand the load at high pressure and temperature. Heat Exchanger Tube is used for parts of energy type equipment such as boilers, steam superheaters, steam pipelines, etc. The tubes are supplied as hot rolled or cold drawn. Specifications, dimensions and the steel grades are shown in a separate overview.

Heat Exchanger Tube dimensions and tolerances

The tube dimensions range from 10.2 mm to 139.7 mm, from 26.9 mm diameter and the wall thickness from 2.6 mm and they supplied as hot rolled. The smaller diameter tubes and the thick wall tubes of larger diameters are supplied as cold drawn and subsequently they are heat treated. The tubes delivery in this condition happens only if there is an agreement upfront at the time of ordering the tubes. Based on an agreement it is possible to deliver Heat Exchanger Tubes with dimensions and tolerances according to the dimensional specifications for precision tubes. The tube dimensions meet the requirements of the following EN 10216-2, DIN 2448, BS 3059-1, BS 3059-2, BS 3602-1, BS 3604-1, NF A 49-211, NF A 49-213, UNI 4991, STN 42 5715, STN 42 5716, ?SN 425715, ?SN 42 5716, GOST 8732, PN-H 74252, ANSI B36.10, ASME B36.10. The detailed dimensional overview is shown in the tables according to EN, DIN, BS, NF A, UNI, STN, ?SN and PN-H standards, GOST standards, TU standards, ANSI standards,ASME standards and standards for precision tubes.

Mechanical & physical properties of various heat exchanger tube candidates, typical unless otherwise noted

Mechanical & physical properties of various heat exchanger tube candidates, typical unless otherwise noted

Steels for Heat Exchanger Tube

The Heat Exchanger Tubes are made from the following steels according to EN 10216-2: P195GH, P235GH, P265GH, 16Mo3, 14MoV6-2, 14MoV6-3, 10CrMo5-5, 13CrMo4-5, 10CrMo9-10, 11CrMo9-10, 25CrMo4, T2, T24, T5,T91; ASTM A 106: Grade A, Grade B, Grade C. Additional steel grades according to DIN 17175, BS 3059-1, BS 3059-2, BS 3602-1, BS 3604-1, NFA 49-211, NF A 49-213, UNI 5462, GOST 8731, GOST 4543, GOST 20072 and PN-H 74252 and its chemical composition and mechanical properties are shown in a separate overview.

Length of the Heat Exchanger Tube

Diameter (OD) [mm] Wall (WT) [mm] Length (L) [m]
OD < 60,3 5 – 6
OD => 60,3 WT < 7,1 5 – 6 or 10 – 14 after an agreement 22,4
WT => 7,1 5 – 6
Types of the length of supplied tubes: (a) random, (b) fixed ± 500 m, (c) exact + 15 / - 0 mm.

Heat Exchanger Tube straightness

Straightness deviation for the whole length of a tube can not exceed value of 0.0015 x L. In conversion to the 1 meter length it can not exceed 3 mm. 

Ends of the Heat Exchanger Tubes

The ends of the tubes are vertical to the longitudinal axis and are without burrs.

Condition of the tubes surface

The tubes condition corresponds to the requirements of appropriate standards, heat treatment to the way of tube manufacturing and chemical composition of steel.

Marking of the tubes and tube bundles

The tubes with the outside diameter up to 51 mm are marked with a label that is attached to the bundle. Larger tubes are marked at least at a one end of a tube by the necessary data.

Surface protection of the Heat Exchanger Tubes

While ordering, it is necessary to agree upon the way and means of temporary protecting the surface of the tubes during transportation and storing. The tubes may be supplied without temporary preservation of the surface, or with the preservation of the surface with an agreed upon preservative.

Packaging of the Heat Exchanger Tubes

The tubes are supplied in packages with a circular or hexagonal diameter with weight of 300 to 3500 kilograms. The tubes are bound with a steel band. It is possible to arrange wrapping to plastic sheet, burlap or to wooden crates.

Testing of Heat Exchanger Tubes

The Heat Exchanger Tubes are tested only with a specified testing.
Test comparison according to DIN 17175 and EN 10216 – 2:

DIN - grade level I
EN - testing class
without ultrasound
I
TC1
with ultrasound
III
TC2

Unalloyed steel– grade I or III, class TC1 or TC2; 
Alloyed steel– level III, class TC2
A precise list of mandatory and optional tests is shown in standards.

The TR1 quality group is usually tested with nonspecified testing. The TR2 quality group is always tested with specified testing. The main difference in the mandatory tests between the TR1 and the TR2 is the fact, that in the TR2 quality the test is done using blow bending test at the 0°C temperature and as an optional test in this quality it is possible to agree on nondestructive test as a proof of longitudinal defects.

Certified test reports

Certified test reports are issued according to the appropriate TDC standards: 
EN 10204 – 3.1 or 3.2
STN, ?SN 42 0251
ASTM A450, A530
DIN 50049 3.1.B

Heat Exchanger Tube Specification Chart

IBR/ NON IBR Heat Exchanger Tube

Request for free quote

Heat Exchanger Tube Price List

Steel GradePriceAvailable in Stock
Heat Exchanger Tubes Price    
374 NOS. TUBE MANUFACTURING PROCESS SEAMLESS, USE HEAT EXCHANGER, MATERIAL ALLOYSTEEL, STANDARD AND GRADE ASTM A 213 T5, INR 469 / Kg
?
TUBE, MANUFACTURING PROCESS SEAMLESS, USE HEAT EXCHANGER, MATERIAL CARBON STEEL, STANDARD AND GRADE ASTM A 179 HEAT EXCHANGER TUBE INR 310 / Kg
?
TUBE, MANUFACTURING PROCESS SEAMLESS, USE HEAT EXCHANGER, MATERIAL ADMIRALTY, STANDARD AND GRADE SB-111-CDA-715, EXTERNA INR 4,780 /Piece
?
19 NOS. TUBE MANUFACTURING PROCESS SEAMLESS, USE HEAT EXCHANGER, MATERIAL ADMIRALTY INR 983 / Kg
?
1845 NOS. TUBE MANUFACTURING PROCESS SEAMLESS, USE HEAT EXCHANGER, MATERIAL ADMIRALTY INR 1,095 /Kg
?
5920 NOS. TUBE MANUFACTURING PROCESS SEAMLESS, USE HEAT EXCHANGER, MATERIAL ADMIRALTY INR 972 /Kg
?
TUBE EXCHANGER HEAT 10MM OD 2MM SEAMLESS316SS ASTM A213 GR TP 316 INR 143 /Piece
?
COLD DRAWN SEAMLESS TUBES FOR HEAT EXCHANGERS CARBON STEEL SEAMLESS TUBES AS PERASME SA 179 19.05MM OD X 2.11MM(MIN) WT INR 113 / Kg
?
COLD DRAWN SEAMLESS TUBES FOR HEAT EXCHANGERS CARBON STEEL SEAMLESS TUBES AS PERASME SA 179 ,25.4 MM OD X 2.11MM(MIN) INR 119 /Kg
?

Heat Exchanger Tube, best quality Heat Exchanger Tube, wide range of Heat Exchanger Tube, Heat Exchanger Tube China, Heat Exchanger Tube manufacturer in India, Heat Exchanger Tube suppliers, distributor, stockholder, dealer, stockist, importer, traders, prime quality Heat Exchanger Tube, Source for Heat Exchanger Tube, specialize in Heat Exchanger Tube, Heat Exchanger Tube with Mill & Test Certificate


Important: Manufacturer, Stockholder, Suppliers, Traders, Wholesaler, Dealer, Stocking Distributors, importer, exporter of Pipes, Tubes & Tubing in Stainless/ Alloy Steel & Carbon Steel ASTM A671/ A672, ASTM A213 Tubes, ASTM A335 Pipes
Copyright © 2016 MD Exports LLP All Rights Reserved.