Home > > ASTM B517 / ASME SB517 / Specification for Welded Nickel Chromium Iron Alloy (UNS N06600) UNS N06025 and UNS N06045 Pipe

Categories


Emergency delivery: Contact MD Exports LLPs


Associate Manufacturers

Surplus stock of Steel Pipes & Tubes:

Specialist in:

Offering best price on:

Widest inventory of:


SS,CS,Alloy Steel Pipe Prices

ASTM B517 / ASME SB517 / Specification for Welded Nickel Chromium Iron Alloy (UNS N06600) UNS N06025 and UNS N06045 Pipe supplier & distributor in India

PIPE & TUBE ASTM STANDARDS

Our Associate manufacturers

ASTM B-517 , ASME SB-517
SPECIFICATION FOR WELDED NICKEL CHROMIUM IRON ALLOY(UNS N06600) 
UNS N06025 AND UNS N06045 PIPEINCONEL 600 = UNS N06600

1.Scope 

1.1 This specification coners weles. cold-worked. and ammesled nickel-chromium-iron alloy (UNS N06600). N06025, 
and N06045 pipe for general corosive service and heat-resisting applications. 

1.2 This specification covers otuside diameter and nominal wall pipe shown in ANSI B 36.19.
Pipe having other dimensions may be funished provided such pipe complies with all other reqirements of this specification. 

1.3 The valus stated in inch-pound units are to be regarded as the standard.

  



TABLE1 CHEMICAL REQUIREMNETS 

Element Composiotion Limits,% Product (check) Analysis Variation, Under Min or Over Max, of the Specified Limit of element
N06600 N06025 N06045
Nickel[Note(1)] 72.0 min. Bal 45.0 min 0.45
Chromium 14.0 min. 24.0-26.0 26.0-29.0 0.15
17.0 min. ... ... 0.25
Iron 6.0 min. 8.0-11.0 21.0-29.0 0.1
10.0 max ... ... 0.10
Manganese 1.0 0.15 max 1.0 max 0.03
Carbon 0.15 max 0.15-0.25 0.05-0.12 0.01
Copper 0.5 max 0.10 max 0.3 max 0.03
Silicon 0.5 max 0.5 max 2.5-3.0 0.03
Sulfur 0.015 max 0.010 max 0.010 max 0.003
Aluminum ... 1.8-2.4 ... ...
titanium ... 0.1-0.2 ... ...
Phosphorus ... 0.02 max 0.02 max ...
Zirconium ... 0.1-0.10 ... ...
Yttrium ... 0.05-0.12 ... ...
Cerium ... ... 0.03-0.09 ...




 TABLE2  MECHANICAL PROPERTY REQUIREMENTS 

Alloy Tensile Strength, Min, psi(MPa) Yield Strength, 0.2% Offset, Min, psi(MPa) Elongation in 2 in. or 50 mm, Min., %
N06600 80000(550) 35000(240) 30
N06025 94000(650) 43000(300) 30
N06045 90000(620) 35000(240) 30

Our Associate manufacturers

Steel pipe & tube ready inventory:


Important: Manufacturer, Stockholder, Suppliers, Traders, Wholesaler, Dealer, Stocking Distributors, importer, exporter of Pipes, Tubes & Tubing in Stainless/ Alloy Steel & Carbon Steel ASTM A671/ A672, ASTM A213 Tubes, ASTM A335 Pipes
Copyright © 2016 MD Exports LLP All Rights Reserved.