Categories



Associate Manufacturers

Surplus stock of Steel Pipes & Tubes:

Specialist in:

Offering best price on:

Widest inventory of:


SS,CS,Alloy Steel Pipe Prices

ASTM B514 / ASME SB514 / Welded Nickel Iron Chromium Alloy Pipe supplier & distributor in India

PIPE & TUBE ASTM STANDARDS

Our Associate manufacturers

ASTM B-514 / ASME SB-514
SPECIFICATION FOR WELDED NICKEL IRON CHROMIUM ALLOY PIPE.
UNS N08810 = INCOLOY 800 , UNS N08810 = INCOLOY 800H

1.Scope 

1.1 This specification civers nikel=iron-chromium allyos in the forn of welded, cold-worked, and annealed pipe for general corrosive service and heat-resisting applications. These products are furnished in two alloys, UNS N08800 and N08810. Alloys UNS N08800 is employed normally in service temperaures up to and including 1100F(539?) Alloy UNS N08810 is employed normally in servise temperatures above 1100F where resistance to crep and rupture is requied, and it is annealed to develop controlled grain size for optimum properties in this temperature range.

1.2 This specification covers outside diameter and nominal wall pipe shown in ANSI B36.19. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of the specification.

1.3 The values stated in inch-pound units are to be regarded as the standard.

  


TABLE1 MECHANICAL PROPERTY REQUIREMENTS 

Alloy Condition(Temper) Tensile Strength, min, psi(MPa) Yield Strength, 0.2% Offset, min, psi(MPa) Elongation in 2 in. or 50mm min, %
UNS N08800 Annealed 75000(520) 30000(207) 30
UNS N08810 Annealed 65000(450) 25000(170) 30



TABLE2 CHEMICAL REQUIREMENTS
 

Element composition Limits, %
Nickel 30.0
35.0
Chromium 19.0
23.0
Iron 39.5
Manganese, max 1.5
Carbon   B
Copper, max 0.75
Silicon, max 1.0
Sulfur, max 0.015
Aluminum 0.15 min
0.60 max
Titanium 0.15 min
0.60 max


 Iron shall be determined arithmetically by difference.  Alloy UNSN08800: 0.10max, Alloy UNS N08810: 0.05 to 0.10.

Our Associate manufacturers

Steel pipe & tube ready inventory: