Home > > ASTM A587 / ASME SA587 / Electric Welded Low Carbon Steel Pipe for the Chemical Industry

Categories


Emergency delivery: Contact MD Exports LLPs


Associate Manufacturers

Surplus stock of Steel Pipes & Tubes:

Specialist in:

Offering best price on:

Widest inventory of:


SS,CS,Alloy Steel Pipe Prices

ASTM A587 / ASME SA587 / Electric Welded Low Carbon Steel Pipe for the Chemical Industry supplier & distributor in India

PIPE & TUBE ASTM STANDARDS

Our Associate manufacturers

ASTM A587-89a/ASME SA-587 

ELECTRIC WELDED LOW CARBON STEEL PIPE FOR THE CHEMICAL INDUSTRY1 
(ASTM A 587 - 89 a / ASME SA - 587 /ASTMA587-89a/ASMESA-587) 

This standard2 is issued under the fixed designation A 587; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon ( ε) indicates an editorial change since the last revision or reapproval. 


1.Scope 

1.1 this specification covers electric-resistance-welded low-carbon steel pipe intended for use as process lines. 

1.2 Pipe ordered under this specification shall be suitable for severe forming operations involving flanging in all sizes and bending to close radii up to and including NPS 4. 

1.3 This specification covers NPS 1/2 through 10, plus additional sizes. The coresponding outside diameters and wall thicknesses for NPS 1/2 through 10 are listed in Table 4, as are the dimensions for the additional sizes. 

NOTE 1¦¡The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as "nominal diameter," "size," and "nominal size." 

1.4 the values stated in inch-pound units are to be regarded as the standard. 

1.5 The following precautionary caveat pertains only to the test method portion, Section 6, 12
and 13, of this specification: This standard does not purport to address all of the safety problems, of any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.



2. Referenced Douments 

2.1 ASTM Standards :

A 53 Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless3
A 370 Test Methods and Definitions for Mechanical Testing of Steel Products4
A 530/A 530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe3
A 751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products3
E 213 Practice for Ultrasonic Inspection of Metal Pipe and Tubing5
E 273 Practic for Ultrasonic Emamination of Longitudinal Welded Pipe and Tubing5
E 309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation5
E 570 Practice for Flux Leakage Exaination of Ferromagnetic Steel Tubular Products5
1/This specification is under the jurisdiction of ASTM Committee A-1 on Steel, Stainless Steel, and Related Alloys, and is the direct responsibility of Subcommittee A01.09 on Steel Pipe. Current edition approved July 15, 1993. Published September 1993. Originally published as A587 - 68. Last previous edition A587 - 92. 2For ASME Boiler and Pressure Vessel Code applications see related Specification SA - 587 in Section II of that Code.
3Annual Bok of ASTM Standards, Vol 01.01. 4Annual Bok of ASTM Standards, Vol 01.03. 5Annual Bok of ASTM Standards, Vol 03.03. 

3. Ordering Information
4. Materials and Manufacture
5. Chemical Composition
6. Mechanical Requirements
7. Dimensions and Permissible Variations
8. Workmanship, Finish, and Appearance
9. Number of Tests
10. Retests
11. Retreatment
12. Test Specimens and Methods of Testing
13. Nondestructive Test
14. Isnpection
15. Rejection
16. Product Marking
17. Packaging  



JIS Number and Corrensponding Foreign Standards 

JIS ASTM BS DIN NF ISO Index Number  
Standard Number   Grade   Tupe   Standard Number   Grade   Tupe     Standard Number Grade   Tupe   Standard Number   Grade   Tupe   Standard No   Grade   Tupe   Standard No   Grade   Tupe  
G3454               STPG370 (STPG38)         C A135 Gr A C 3601 ERW360 C 1626 St37.0 C A49-112 TS27b C 559 TS4 C C002        
A587 - C " S360 C 1629 St37.0 C A49-141 TS37a C 2604/2 TS4 C
17172 StE210.7 C A49-142 TS37a C 2604/3 TW4 C
" TS37b C
A49-150 TSE235 C
A49-212 TS37c C
A49-242 TS37c C
A49-250 TAE24a C
A49-400 TSE220 C
STPG410 (STPG42)     C A135 GrB C 3601 ERW410 C 1626 St44.0 C A49-112 TS42b C 559 TS9 C
A524 - C " S410 C A49-141 TS42b C 2604/2 TW9 C
A49-212 TS42c C 2604/3 TW9 C
A49-242 TS42c C 3183 E24-1 C
A49-250 TSE26b C " E24-2
A49-400 TSE250 C

 

Our Associate manufacturers

Steel pipe & tube ready inventory:


Important: Manufacturer, Stockholder, Suppliers, Traders, Wholesaler, Dealer, Stocking Distributors, importer, exporter of Pipes, Tubes & Tubing in Stainless/ Alloy Steel & Carbon Steel ASTM A671/ A672, ASTM A213 Tubes, ASTM A335 Pipes
Copyright © 2016 MD Exports LLP All Rights Reserved.