Home > > ASTM A226 / ASME SA226 / Electric Resistance Welded Carbon Steel Boiler and Superheater Tubes

Categories


Emergency delivery: Contact MD Exports LLPs


Associate Manufacturers

Surplus stock of Steel Pipes & Tubes:

Specialist in:

Offering best price on:

Widest inventory of:


SS,CS,Alloy Steel Pipe Prices

ASTM A226 / ASME SA226 / Electric Resistance Welded Carbon Steel Boiler and Superheater Tubes supplier & distributor in India

PIPE & TUBE ASTM STANDARDS

Our Associate manufacturers

ASTM A226M-88/ ASME SA226 
ELECRTIC RESISTANCE WELDED CARBON STEEL BOILER AND SUPERGEATER
TUBES FOR HIGH PRESSURE SERVICE

(ASTM A 226 M - 88 / ASME SA 226 / ASTMA226M-88/ASMESA226)

This standard is issued under the fixed designation A 226/A 226M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon ( ε) indicates an editorial change since the last revision or reapproval.

1.Scope 


1.1 This specification covers minimum-wall-thickness, electric-resistance-welded, carbon steel, boiler and superheater tubes for high-pressure service.

1.2 The tubing sizes and thicknesses usually furnished to this specification are 1/2 in. to 5 in. [12.7 to 127 mm] in outside diameter and 0.085 to 0.360 in. [2.2 to 9.1 mm] inclusive, in minimum wall thickness, Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification.

1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness.

1.4 When these products are to be used in applications conforming to ISO Recommendations for Boiler Construction, the requirements of Specification A 520 shall supplement and supersede the requirements of this specification.

1.5 The values stated in either inch0pound units or SI units are to be regarded separately as standard. Within the text, the SI units a shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.

JIS Number and Corrensponding Foreign Standards

JIS ASTM BS DIN NF ISO Index Number
Standard Number Grade Type Standard Number Grade Type Standard Number Grade Type Standard Number Grade Type Standard Number Grade Type Standard Number Grade Type
G3461 STB340 C A161 LC C 3059 HFS320 C A49-245 TS34e C C010
(STB35) A192 - C " CFS320 C " TS34c C
A226 - C " ERW320 C
A556 GrA2 C " CEW320 C
A557 GrA2 C " S1 360 C
" S2 360 C
" ERW 360 C
" CEW360 C
3606 ERW320 C
" CEW320 C
" CFS320 C
STB410 C A179 GrC C 3059 S1 440 C 17175 St45.8 C A49-213 TU42c C 2604/2 TS9H C
(STB42) A210 GrA1 C " S2 440 C 17177 St42.8 C A49-215 TU42c C " TW9H C
A556 GrB2 C " ERW 440 C A49-243 TS42c
A557 GrB2 C " CEW 440 C A49-245 TS42c
3602 HFS 410 C " TS42c
" CFS 410 C
" ERW 410 C
" CEW 410 C
3606 ERW 440 C
" CEW 440 C
" CFS 440 C
STB510 C C 17175 19Mn5 C A49-213 TU52C C 2604/2 TS18 C
(STB52) C A49-248 TU52C C

Our Associate manufacturers

Steel pipe & tube ready inventory:


Important: Manufacturer, Stockholder, Suppliers, Traders, Wholesaler, Dealer, Stocking Distributors, importer, exporter of Pipes, Tubes & Tubing in Stainless/ Alloy Steel & Carbon Steel ASTM A671/ A672, ASTM A213 Tubes, ASTM A335 Pipes
Copyright © 2016 MD Exports LLP All Rights Reserved.